T2 Telescope Transports
Telescope transports allow you to move your telescope easily, without lifting.Each transport is a special order. We will work with you to manufacture precisely what works best with your telescope.At right is a custom designed T2 Telescope Transport for an 11" custom Dobsonian. The center of the dolly is open to reduce weight. Three pneumatic tires underneath raise the height of the telescope 10 inches to a comfortable viewing position. The three medium size circles are for the Dob feet to set into. Threaded rods with knobs on top and anti-vibration feet underneath, are screwed down to the ground reducing any potential vibration from the wheels. A removable handle is attached in the front of the dolly..Please contact us. All types of custom solutions are possible. We'll be happy to discuss what will work best for you.

CNC precision cut 3/4" Baltic Birch plywood. Bearing surfaces. All hardware is stainless steel. Wheels are 6" pneumatic - front one swivels and locks, rear are rigid. Wheels can be changed to others if desired. Finished mounts have up to eight coats of fine sprayed polymer sealer, with an ebony (reddish) tint.

Payment is by PayPal or credit card via PayPal. You do not need a PayPal account.

We will e-mail a PayPal invoice for the balance due plus shipping when your mount is ready.

For estimated shipping costs, e-mail or call with the diameter of your ground board so can determine the total size of the transport.
If you have any questions or would like to discuss your mount, please e-mail or call.
After your deposit is received, we will e-mail you to obtain these dimensions:
  1. Confirm circumference of the telescope's ground board.
  2. Size and position of feet on your ground board.

T2 Telescope Transports are available only finished. No kits.